首页下载资源硬件开发stm32f103c8t6按键数码管编程+proteus原理图

ZIPstm32f103c8t6按键数码管编程+proteus原理图

mym3513818695.77MB需要积分:1

资源文件列表:

stm32按键+proteus.zip 大约有177个文件
  1. keil/
  2. keil/button.uvgui.1 68.98KB
  3. keil/button.uvopt 17.48KB
  4. keil/button.uvproj 20.84KB
  5. keil/CORE/
  6. keil/CORE/core_cm3.c 16.87KB
  7. keil/CORE/core_cm3.h 83.71KB
  8. keil/CORE/startup_stm32f10x_ld.s 12.09KB
  9. keil/Listings/
  10. keil/Listings/button.map 99.33KB
  11. keil/Listings/startup_stm32f10x_ld.lst 38.17KB
  12. keil/OBJ/
  13. keil/OBJ/button.axf 445.17KB
  14. keil/OBJ/button.build_log.htm 2.03KB
  15. keil/OBJ/button.hex 4.25KB
  16. keil/OBJ/button.hex.asm 21B
  17. keil/OBJ/button.htm 32.36KB
  18. keil/OBJ/button.lnp 967B
  19. keil/OBJ/button.sct 479B
  20. keil/OBJ/button_Target 1.dep 48.6KB
  21. keil/OBJ/core_cm3.crf 3.85KB
  22. keil/OBJ/core_cm3.d 99B
  23. keil/OBJ/core_cm3.o 10.73KB
  24. keil/OBJ/digit.crf 337.77KB
  25. keil/OBJ/digit.d 1.35KB
  26. keil/OBJ/digit.o 370.69KB
  27. keil/OBJ/led.crf 337.81KB
  28. keil/OBJ/led.d 1.29KB
  29. keil/OBJ/led.o 371.65KB
  30. keil/OBJ/main.crf 338.32KB
  31. keil/OBJ/main.d 1.33KB
  32. keil/OBJ/main.o 371.66KB
  33. keil/OBJ/misc.crf 338.36KB
  34. keil/OBJ/misc.d 1.34KB
  35. keil/OBJ/misc.o 372.81KB
  36. keil/OBJ/startup_stm32f10x_ld.d 59B
  37. keil/OBJ/startup_stm32f10x_ld.o 5.63KB
  38. keil/OBJ/stm32f10x_adc.crf 345.36KB
  39. keil/OBJ/stm32f10x_adc.d 1.63KB
  40. keil/OBJ/stm32f10x_adc.o 417.84KB
  41. keil/OBJ/stm32f10x_bkp.crf 339.28KB
  42. keil/OBJ/stm32f10x_bkp.d 1.63KB
  43. keil/OBJ/stm32f10x_bkp.o 382.23KB
  44. keil/OBJ/stm32f10x_can.crf 346.93KB
  45. keil/OBJ/stm32f10x_can.d 1.63KB
  46. keil/OBJ/stm32f10x_can.o 403.7KB
  47. keil/OBJ/stm32f10x_cec.crf 339.82KB
  48. keil/OBJ/stm32f10x_cec.d 1.63KB
  49. keil/OBJ/stm32f10x_cec.o 384.72KB
  50. keil/OBJ/stm32f10x_crc.crf 337.92KB
  51. keil/OBJ/stm32f10x_crc.d 1.63KB
  52. keil/OBJ/stm32f10x_crc.o 373.78KB
  53. keil/OBJ/stm32f10x_dac.crf 339.95KB
  54. keil/OBJ/stm32f10x_dac.d 1.63KB
  55. keil/OBJ/stm32f10x_dac.o 382.86KB
  56. keil/OBJ/stm32f10x_dbgmcu.crf 337.72KB
  57. keil/OBJ/stm32f10x_dbgmcu.d 1.73KB
  58. keil/OBJ/stm32f10x_dbgmcu.o 370.04KB
  59. keil/OBJ/stm32f10x_dma.crf 341.39KB
  60. keil/OBJ/stm32f10x_dma.d 1.63KB
  61. keil/OBJ/stm32f10x_dma.o 382.36KB
  62. keil/OBJ/stm32f10x_exti.crf 338.9KB
  63. keil/OBJ/stm32f10x_exti.d 1.67KB
  64. keil/OBJ/stm32f10x_exti.o 376.72KB
  65. keil/OBJ/stm32f10x_flash.crf 345.2KB
  66. keil/OBJ/stm32f10x_flash.d 1.7KB
  67. keil/OBJ/stm32f10x_flash.o 407.19KB
  68. keil/OBJ/stm32f10x_fsmc.crf 343.74KB
  69. keil/OBJ/stm32f10x_fsmc.d 1.67KB
  70. keil/OBJ/stm32f10x_fsmc.o 393.3KB
  71. keil/OBJ/stm32f10x_gpio.crf 341.77KB
  72. keil/OBJ/stm32f10x_gpio.d 1.67KB
  73. keil/OBJ/stm32f10x_gpio.o 392.19KB
  74. keil/OBJ/stm32f10x_i2c.crf 344.15KB
  75. keil/OBJ/stm32f10x_i2c.d 1.63KB
  76. keil/OBJ/stm32f10x_i2c.o 412.18KB
  77. keil/OBJ/stm32f10x_it.crf 338.02KB
  78. keil/OBJ/stm32f10x_it.d 1.58KB
  79. keil/OBJ/stm32f10x_it.o 380.38KB
  80. keil/OBJ/stm32f10x_iwdg.crf 338.02KB
  81. keil/OBJ/stm32f10x_iwdg.d 1.67KB
  82. keil/OBJ/stm32f10x_iwdg.o 373.74KB
  83. keil/OBJ/stm32f10x_pwr.crf 339.18KB
  84. keil/OBJ/stm32f10x_pwr.d 1.63KB
  85. keil/OBJ/stm32f10x_pwr.o 378.27KB
  86. keil/OBJ/stm32f10x_rcc.crf 345.26KB
  87. keil/OBJ/stm32f10x_rcc.d 1.63KB
  88. keil/OBJ/stm32f10x_rcc.o 410.96KB
  89. keil/OBJ/stm32f10x_rtc.crf 339.18KB
  90. keil/OBJ/stm32f10x_rtc.d 1.63KB
  91. keil/OBJ/stm32f10x_rtc.o 384.27KB
  92. keil/OBJ/stm32f10x_sdio.crf 342.37KB
  93. keil/OBJ/stm32f10x_sdio.d 1.67KB
  94. keil/OBJ/stm32f10x_sdio.o 405.96KB
  95. keil/OBJ/stm32f10x_spi.crf 342.24KB
  96. keil/OBJ/stm32f10x_spi.d 1.63KB
  97. keil/OBJ/stm32f10x_spi.o 398.38KB
  98. keil/OBJ/stm32f10x_tim.crf 359.93KB
  99. keil/OBJ/stm32f10x_tim.d 1.63KB
  100. keil/OBJ/stm32f10x_tim.o 493.16KB
  101. keil/OBJ/stm32f10x_usart.crf 343.84KB
  102. keil/OBJ/stm32f10x_usart.d 1.7KB
  103. keil/OBJ/stm32f10x_usart.o 407.2KB
  104. keil/OBJ/stm32f10x_wwdg.crf 338.46KB
  105. keil/OBJ/stm32f10x_wwdg.d 1.67KB
  106. keil/OBJ/stm32f10x_wwdg.o 376.54KB
  107. keil/OBJ/system_stm32f10x.crf 339.49KB
  108. keil/OBJ/system_stm32f10x.d 1.66KB
  109. keil/OBJ/system_stm32f10x.o 372.07KB
  110. keil/Objects/
  111. keil/STM32LIB/
  112. keil/STM32LIB/inc/
  113. keil/STM32LIB/inc/misc.h 8.77KB
  114. keil/STM32LIB/inc/stm32f10x_adc.h 21.18KB
  115. keil/STM32LIB/inc/stm32f10x_bkp.h 7.38KB
  116. keil/STM32LIB/inc/stm32f10x_can.h 26.91KB
  117. keil/STM32LIB/inc/stm32f10x_cec.h 6.42KB
  118. keil/STM32LIB/inc/stm32f10x_crc.h 2.11KB
  119. keil/STM32LIB/inc/stm32f10x_dac.h 14.88KB
  120. keil/STM32LIB/inc/stm32f10x_dbgmcu.h 3.73KB
  121. keil/STM32LIB/inc/stm32f10x_dma.h 20.27KB
  122. keil/STM32LIB/inc/stm32f10x_exti.h 6.66KB
  123. keil/STM32LIB/inc/stm32f10x_flash.h 24.85KB
  124. keil/STM32LIB/inc/stm32f10x_fsmc.h 26.38KB
  125. keil/STM32LIB/inc/stm32f10x_gpio.h 19.7KB
  126. keil/STM32LIB/inc/stm32f10x_i2c.h 29.33KB
  127. keil/STM32LIB/inc/stm32f10x_iwdg.h 3.74KB
  128. keil/STM32LIB/inc/stm32f10x_pwr.h 4.28KB
  129. keil/STM32LIB/inc/stm32f10x_rcc.h 29.74KB
  130. keil/STM32LIB/inc/stm32f10x_rtc.h 3.77KB
  131. keil/STM32LIB/inc/stm32f10x_sdio.h 21.35KB
  132. keil/STM32LIB/inc/stm32f10x_spi.h 17.31KB
  133. keil/STM32LIB/inc/stm32f10x_tim.h 51.2KB
  134. keil/STM32LIB/inc/stm32f10x_usart.h 16.16KB
  135. keil/STM32LIB/inc/stm32f10x_wwdg.h 2.9KB
  136. keil/STM32LIB/src/
  137. keil/STM32LIB/src/misc.c 6.88KB
  138. keil/STM32LIB/src/stm32f10x_adc.c 46.09KB
  139. keil/STM32LIB/src/stm32f10x_bkp.c 8.26KB
  140. keil/STM32LIB/src/stm32f10x_can.c 44.05KB
  141. keil/STM32LIB/src/stm32f10x_cec.c 11.38KB
  142. keil/STM32LIB/src/stm32f10x_crc.c 3.27KB
  143. keil/STM32LIB/src/stm32f10x_dac.c 18.64KB
  144. keil/STM32LIB/src/stm32f10x_dbgmcu.c 5.03KB
  145. keil/STM32LIB/src/stm32f10x_dma.c 28.91KB
  146. keil/STM32LIB/src/stm32f10x_exti.c 6.8KB
  147. keil/STM32LIB/src/stm32f10x_flash.c 61.08KB
  148. keil/STM32LIB/src/stm32f10x_fsmc.c 34.65KB
  149. keil/STM32LIB/src/stm32f10x_gpio.c 22.68KB
  150. keil/STM32LIB/src/stm32f10x_i2c.c 44.71KB
  151. keil/STM32LIB/src/stm32f10x_iwdg.c 4.8KB
  152. keil/STM32LIB/src/stm32f10x_pwr.c 8.55KB
  153. keil/STM32LIB/src/stm32f10x_rcc.c 50.07KB
  154. keil/STM32LIB/src/stm32f10x_rtc.c 8.4KB
  155. keil/STM32LIB/src/stm32f10x_sdio.c 28.25KB
  156. keil/STM32LIB/src/stm32f10x_spi.c 29.52KB
  157. keil/STM32LIB/src/stm32f10x_tim.c 106.6KB
  158. keil/STM32LIB/src/stm32f10x_usart.c 37.41KB
  159. keil/STM32LIB/src/stm32f10x_wwdg.c 5.6KB
  160. keil/USER/
  161. keil/USER/digit.c 414B
  162. keil/USER/digit.h 153B
  163. keil/USER/led.c 848B
  164. keil/USER/led.h 175B
  165. keil/USER/led.h.bak
  166. keil/USER/main.c 859B
  167. keil/USER/stm32f10x.h 619.08KB
  168. keil/USER/stm32f10x_conf.h 3.18KB
  169. keil/USER/stm32f10x_it.c 4.71KB
  170. keil/USER/stm32f10x_it.h 2.11KB
  171. keil/USER/system_stm32f10x.c 35.69KB
  172. keil/USER/system_stm32f10x.h 2.04KB
  173. protues/
  174. protues/Backup Of button.pdsbak 83.35KB
  175. protues/button.pdsprj 94.16KB
  176. protues/button.pdsprj.DESKTOP-J4OK9VH.1.workspace 13.72KB
  177. protues/Last Loaded button.pdsbak 94.22KB

资源介绍:

实验要求 使用proteus仿真+keil编译 用Proteus设计一个STM32最小系统板+按键+数码管实验原理图，仿真运行。 以STM32最小系统核心板(STM32F103C8T6)编写程序驱动数码管，显示0-9数字，通过按键控制数字显示，每按一次数字加1，到9返回0。 用stm32标准库编写，有必要的注释。
/** ****************************************************************************** * @file stm32f10x_tim.c * @author MCD Application Team * @version V3.5.0 * @date 11-March-2011 * @brief This file provides all the TIM firmware functions. ****************************************************************************** * @attention * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * *

© COPYRIGHT 2011 STMicroelectronics

****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f10x_tim.h" #include "stm32f10x_rcc.h" /** @addtogroup STM32F10x_StdPeriph_Driver * @{ */ /** @defgroup TIM * @brief TIM driver modules * @{ */ /** @defgroup TIM_Private_TypesDefinitions * @{ */ /** * @} */ /** @defgroup TIM_Private_Defines * @{ */ /* ---------------------- TIM registers bit mask ------------------------ */ #define SMCR_ETR_Mask ((uint16_t)0x00FF) #define CCMR_Offset ((uint16_t)0x0018) #define CCER_CCE_Set ((uint16_t)0x0001) #define CCER_CCNE_Set ((uint16_t)0x0004) /** * @} */ /** @defgroup TIM_Private_Macros * @{ */ /** * @} */ /** @defgroup TIM_Private_Variables * @{ */ /** * @} */ /** @defgroup TIM_Private_FunctionPrototypes * @{ */ static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter); /** * @} */ /** @defgroup TIM_Private_Macros * @{ */ /** * @} */ /** @defgroup TIM_Private_Variables * @{ */ /** * @} */ /** @defgroup TIM_Private_FunctionPrototypes * @{ */ /** * @} */ /** @defgroup TIM_Private_Functions * @{ */ /** * @brief Deinitializes the TIMx peripheral registers to their default reset values. * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. * @retval None */ void TIM_DeInit(TIM_TypeDef* TIMx) { /* Check the parameters */ assert_param(IS_TIM_ALL_PERIPH(TIMx)); if (TIMx == TIM1) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); } else if (TIMx == TIM2) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); } else if (TIMx == TIM3) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); } else if (TIMx == TIM4) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); } else if (TIMx == TIM5) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); } else if (TIMx == TIM6) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); } else if (TIMx == TIM7) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); } else if (TIMx == TIM8) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); } else if (TIMx == TIM9) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); } else if (TIMx == TIM10) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); } else if (TIMx == TIM11) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); } else if (TIMx == TIM12) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); } else if (TIMx == TIM13) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); } else if (TIMx == TIM14) { RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); } else if (TIMx == TIM15) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); } else if (TIMx == TIM16) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); } else { if (TIMx == TIM17) { RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); } } } /** * @brief Initializes the TIMx Time Base Unit peripheral according to * the specified parameters in the TIM_TimeBaseInitStruct. * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef * structure that contains the configuration information for the * specified TIM peripheral. * @retval None */ void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) { uint16_t tmpcr1 = 0; /* Check the parameters */ assert_param(IS_TIM_ALL_PERIPH(TIMx)); assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); tmpcr1 = TIMx->CR1; if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| (TIMx == TIM4) || (TIMx == TIM5)) { /* Select the Counter Mode */ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; } if((TIMx != TIM6) && (TIMx != TIM7)) { /* Set the clock division */ tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; } TIMx->CR1 = tmpcr1; /* Set the Autoreload value */ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; /* Set the Prescaler value */ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) { /* Set the Repetition Counter value */ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; } /* Generate an update event to reload the Prescaler and the Repetition counter values immediately */ TIMx->EGR = TIM_PSCReloadMode_Immediate; } /** * @brief Initializes the TIMx Channel1 according to the specified * parameters in the TIM_OCInitStruct. * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. * @param TIM_OCInitStru
100+评论
captcha

    相关资源

    1. springboot aop切面实现方法入参及返回结果数据加解密

      AL_guli#后端ZIP142.78KB7月前
      资源摘要:springboot+aop自定义注解(切入点为方法)可对请求入参或者返回结果进行加解密可允许用户自定义加解密工具类本工具自带默认加解密工具类，用户可自行选择是否使用

    2. stm32f103c8+proteus8.9+温度传感器ds18b20

      mym351381869#硬件开发ZIP5.79MB7月前
      资源摘要:实验要求使用proteus仿真+keil编译用Proteus设计一个STM32最小系统板+温度传感器ds18b20实验原理图，仿真运行。以STM32最小系统核心板(STM32F103C8T6)编写程序，驱动ds18b20，使用proteus8.9编写原理图。用stm32标准库编写，有必要的注释。

    3. Bz二进制编辑工具（压缩包）

      uolo_python#数据库ZIP53.17KB7月前
      资源摘要:Bz1621.lzh官方版是一款实用的二进制编辑器软件。Bz1621.lzh最新版具有4种编辑模式(文本、十六进制、十进制、二进制)。软件内置了两个插件(Hex Calculator 与 Base Converter)。Bz1621.lzh官方版可以对操作的语言进行自定义的选择，不对中文的语言支持。Bz1621.lzh基本简介： Bz1621.lzh官方版是30天自制操作系统书中提到的一款二进制编辑器，不需要安装，解压缩之后打开Bz.exe就能直接使用了，目前windows所有操作系统都能运行，有需要的赶快下载吧!Bz1621.lzh功能介绍：1、Bz1621.lzh官方版可以编辑非常大的文件，最大可高达4GB。2、具有4种编辑模式(文本、十六进制、十进制、二进制)。3、内置了两个插件(Hex Calculator 与 Base Converter)。4、可快速加载文件。Bz1621.lzh软件特色： Bz1621.lzh官方版可以对操作的语言进行自定义的选择，不对中文的语言支持。也可根据自己的使用需求来对软件内置的功能设置，可以对软件的背景颜色进行更改。

    4. st-link驱动安装包，可以匹配USB

      2301_76462968#硬件开发ZIP5.1MB7月前
      资源摘要:st-link驱动安装包，可以解决初次使用st-link时的端口无法检测到对应的端口问题，本人初次遇到该问题的时候，是在stm32c8t6最小系统板，因为其不具备烧录口，需要外接st-link，但是由于第一次使用，keil5在烧录过程总始终无法检测到，因此进行大量上网搜索才发现需要安装驱动，个人感觉也是新手小白初学时会遇到的问题，也希望能为大家提供帮助

    5. NPOI2.4.1使用 NPOI 你就可以在没有安装 Office 或者相应环境的机器上对 WORD/EXCEL 文档进行读写

      DRAGON_SIR_#操作系统ZIP4.61MB7月前
      资源摘要:NPOI2.4.1使用 NPOI 你就可以在没有安装 Office 或者相应环境的机器上对 WORD/EXCEL 文档进行读写

    6. NPOI2.5.6版本

      DRAGON_SIR_#操作系统ZIP10.62MB7月前
      资源摘要:NPOI是指构建在POI 3.x版本之上的一个程序，NPOI可以在没有安装Office的情况下对Word或Excel文档进行读写操作。NPOI是一个开源的C#读写Excel、WORD等微软OLE2组件文档的项目。NPOI之所以强大，并不是因为它支持导出Excel，而是因为它支持导入Excel，并能“理解”OLE2文档结构，这也是其他一些Excel读写库比较弱的方面。通常，读入并理解结构远比导出来得复杂，因为导入你必须假设一切情况都是可能的，而生成你只要保证满足你自己需求就可以了，如果把导入需求和生成需求比做两个集合，那么生成需求通常都是导入需求的子集，这一规律不仅体现在Excel读写库中，也体现在pdf读写库中，目前市面上大部分的pdf库仅支持生成，不支持导入。

    7. stm32f103c8t6+8位数码管，使用proteus仿真+keil编译

      mym351381869#硬件开发ZIP5.86MB7月前
      资源摘要:实验要求使用proteus仿真+keil编译用Proteus设计一个STM32最小系统板+8位数码管实验原理图，仿真运行。以STM32最小系统核心板(STM32F103C8T6)编写程序驱动数码管，显示0-9数字。用stm32标准库编写，有必要的注释。

    8. STM32F103C8T6+LED显示

      mym351381869#硬件开发ZIP10.97MB7月前
      资源摘要:实验要求用proteus+keil编写用Proteus设计一个STM32最小系统板+LED流水灯实验原理图，仿真运行。以STM32最小系统核心板(STM32F103C8T6)+3只红绿蓝LED搭建电路，使用GPIOA端口控制LED灯，轮流闪烁，间隔时长1秒。程序采用stm32标准库编写，keil5编译，代码有详细注解。
    站长QQ:九六九五七三七